6.3kWnominal output
- DEFRA ExemptSmoke control areas
- EcodesignCleaner-burn standard
- AirwashKeeps the glass clear
- CleanburnEfficient secondary burn
- External AirDirect outside air supply
Heta · Wood Burning Stoves
Heta Inspire 55 Wood Burning Stove
Inspire 55 is the wider model in the Inspire group, with a 6.3kW nominal output, 560mm combustion chamber and large glazed door. Its steel construction and cast-iron fire components are offered in standard and log-store forms, giving the same broad firebox two different vertical proportions.
- Output6.3kW
- FormatFreestanding
- RatingA+
- Broad 560mm combustion chamber width
- Large glass window for a panoramic flame picture
- Integrated log-store option available
Price on request - visit the Lichfield showroom
- Check current HETAS registration
- Confirm survey availability
- Written quote
Key features
- 6.3kW nominal output
- 80% efficiency
- 30-120m2 heating guidance
- 125-150mm flue outlet
- Available with integrated log-store
Specification
Inspire 55
- Height
- 555mm
- Width
- 652mm
- Depth
- 403mm
- Combustion chamber width
- 560mm
- Nominal output
- 6.3kW
- Output range
- 4 to 10kW
- Room size
- 30 to 120 square metres
- Weight
- 110-137kg
- Flue outlet
- 125 to 150mm
- Energy rating
- A+
- Versions
- 55, 55H (raised) or 55HK with cooking plate
- Efficiency
- 80%
- Construction
- 5-8mm steel with cast iron door, fire base and shaker grate
- Smoke control
- DEFRA exempt for wood logs when the mechanical stop prevents air control closure beyond the 41% open position
Proposed project scope
TFS currently advertises HETAS-registered installation and a home-survey service. Confirm both before booking. A proposed scope may include:
- The exact stove and recorded output checked against the room brief
- The proposed liner or factory-made chimney system identified
- Any hearth, chamber and fireplace work set out in writing
- Compatible connecting, closure and terminal components specified
- Testing, commissioning and operating guidance included where applicable
- The compliance and notification route confirmed before work is booked
Is it right for you?
Deciding whether Heta Inspire 55 Wood Burning Stove fits the brief
The log-store version adds height and storage beneath the wide firebox. Its scale is best compared with the standard version once the room, hearth and intended viewing height have been measured.
Before quotation
What to settle before specifying Heta Inspire 55 Wood Burning Stove
A rear connection is listed for an optional direct combustion-air supply. Whether it should be used, and how it can be routed, needs to be considered with the appliance, flue and fabric of the property.
Ventilation must be specified for the actual room and appliance under the Building Regulations in force at the time of installation. The survey should establish whether a direct-air connection or permanent room ventilation is required.
An honest steer
How it compares with similar models
Heta also build this stove on a log store base, listed on the old range as the Inspire 55 Log Store. It is the same 6.3kW stove raised on a store, not a different model. Heta themselves sell it as the 55 and 55H on one product page.
Choose Inspire 55 over Inspire 45 for width and larger-room presence. Choose the Scan-Line 900 or 95H if the brief is more architectural and freestanding.
Fitting it locally
Fitting the Heta Inspire 55 Wood Burning Stove in West Midlands homes
A strong shortlist model for larger living rooms around Derby, Sutton Coldfield and Solihull where a broad flame view is part of the brief.
Common questions
Questions to check about Heta Inspire 55 Wood Burning Stove
Is the Inspire 55 the largest Inspire model?
Heta describes the Inspire 55 and 55H as the largest wood-burning stove in the Inspire series.
Is it DEFRA approved?
Yes. The DEFRA register lists the Inspire 55 and 55H for wood logs when the mechanical stop prevents air control closure beyond 41% open.
Explore
