4.5kWnominal output
- DEFRA ExemptSmoke control areas
- EcodesignCleaner-burn standard
- AirwashKeeps the glass clear
- CleanburnEfficient secondary burn
- External AirDirect outside air supply
Heta · Wood Burning Stoves
Heta Inspire 40 Wood Burning Stove
Inspire 40 is a compact Danish wood-burning stove with a steel body and cast-iron door, fire base and shaker grate. Its restrained proportions work in both an existing fireplace opening and the taller log-store configuration, while the listed 4–6.3kW output range allows the final choice to be checked against the room.
- Output4.5kW
- FormatFreestanding
- RatingA+
- Compact Inspire body for smaller rooms and fireplace openings
- Steel construction with cast iron door, fire base and shaker grate
- Available in standard and log-store formats
Price on request - visit the Lichfield showroom
- Check current HETAS registration
- Confirm survey availability
- Written quote
Key features
- 4.5kW nominal output
- 81% efficiency
- 20-80m2 heating guidance
- 125-150mm flue outlet
- Combustion performance controllable from low burn rates
Specification
Inspire 40
- Height
- 585mm
- Width
- 460mm
- Depth
- 367mm
- Combustion chamber width
- 370mm
- Output range
- 4 to 6.3kW
- Room size
- 20 to 80 square metres
- Weight
- 78-96kg
- Flue outlet
- 125 to 150mm
- Energy rating
- A+
- Construction
- 5-8mm steel with cast iron door, fire base and shaker grate
- Nominal output
- 4.5kW
- Efficiency
- 81%
- Smoke control
- DEFRA exempt for wood logs when the air control stop prevents closure beyond the 41% open position
Proposed project scope
TFS currently advertises HETAS-registered installation and a home-survey service. Confirm both before booking. A proposed scope may include:
- The exact stove and recorded output checked against the room brief
- The proposed liner or factory-made chimney system identified
- Any hearth, chamber and fireplace work set out in writing
- Compatible connecting, closure and terminal components specified
- Testing, commissioning and operating guidance included where applicable
- The compliance and notification route confirmed before work is booked
Is it right for you?
Deciding whether Heta Inspire 40 Wood Burning Stove fits the brief
The log-store version raises the firebox and adds open storage below. It can be considered where a taller freestanding proportion works better than a low stove in a traditional chamber.
Before quotation
What to settle before specifying Heta Inspire 40 Wood Burning Stove
A rear connection is listed for an optional direct combustion-air supply. Whether it should be used, and how it can be routed, needs to be considered with the appliance, flue and fabric of the property.
Ventilation must be specified for the actual room and appliance under the Building Regulations in force at the time of installation. The survey should establish whether a direct-air connection or permanent room ventilation is required.
An honest steer
How it compares with similar models
Heta also build this stove on a log store base, listed on the old range as the Inspire 40 Log Store. It is the same 4.9kW stove raised on a store, not a different model. Heta themselves sell it as the 40 and 40H on one product page.
Choose Inspire 40 for compact placement. Step up to Inspire 45 for a wider landscape face, or Inspire 55 for a much broader firebox.
Fitting it locally
Fitting the Heta Inspire 40 Wood Burning Stove in West Midlands homes
A useful shortlist model for Lichfield and Tamworth homes where a modest room still needs a good flame picture and clean glass.
Common questions
Questions to check about Heta Inspire 40 Wood Burning Stove
Is the Heta Inspire 40 suitable for smoke-control areas?
Yes. The DEFRA register lists the Inspire 40 and Inspire 45 for wood logs when the air control stop prevents closure beyond 41% open.
Does TFS publish an Inspire 40 price online?
No. We quote after the showroom conversation or home survey so the stove and installation are specified properly.
Explore
