4.3kWnominal output- DEFRA ExemptSmoke control areas
- EcodesignCleaner-burn standard
- AirwashKeeps the glass clear
ACR · Wood Burning Stoves
ACR Woodpecker WP4 LS Wood Burning Stove
The ACR Woodpecker WP4 LS is the WP4 wood burner raised on an integrated log store base, a compact 4.3kW dedicated wood stove that stands 674mm high with storage for logs beneath. It suits a chimney breast or a freestanding flue system and burns seasoned logs and compressed hotblocks.
- Output4.3kW
- FuelWood only
- FormatFreestanding
- Flue125mm
- RatingA
- Integrated log store base for storage beneath the stove
- Can be considered for a chimney-breast setting or a freestanding flue design
- Dedicated wood burner for a cleaner, more efficient burn
- DEFRA approved for smoke control areas and built to Ecodesign 2022 standards
Price on request - visit the Lichfield showroom
- Check current HETAS registration
- Confirm survey availability
- Written quote
Key features
- Rated at 4.3kW nominal, with controllable heat quoted at approximately 2–5.5kW
- Log store base built into the stand, raising the stove to 674mm high
- A wood-only firebox for seasoned logs and compressed hotblocks
- A tertiary-air stage supports a hotter, more complete burn
- Takes logs up to 30cm
- A energy rated, five year stove body warranty through an authorised ACR retailer
Specification
Woodpecker WP4 LS
- Fuel
- Wood
- Nominal output
- 4.3kW
- Height
- 674mm
- Width
- 373mm
- Depth
- 360mm
- Output range
- 4.3kW nominal (2kW min / 5.5kW max)
- Efficiency
- 68.7% gross, 75.4% nett
- Hearth requirement
- 12mm non-combustible hearth (below 100 degrees, see Building Regulations)
- Weight
- 90kg
- Flue size
- 125mm
- Smoke control
- Yes, DEFRA approved for wood burning in smoke control areas
- Maximum log length
- 30cm
- Energy rating
- A
- Warranty
- 5 years
Proposed project scope
TFS currently advertises HETAS-registered installation and a home-survey service. Confirm both before booking. A proposed scope may include:
- The exact stove and recorded output checked against the room brief
- The proposed liner or factory-made chimney system identified
- Any hearth, chamber and fireplace work set out in writing
- Compatible connecting, closure and terminal components specified
- Testing, commissioning and operating guidance included where applicable
- The compliance and notification route confirmed before work is booked
Technical documents
Is it right for you?
Deciding whether ACR Woodpecker WP4 LS Wood Burning Stove fits the brief
The WP4 LS is for smaller rooms where you want the compact 4.3kW wood stove but also want it raised, with a log store built into the base. The taller stance lifts the firebox to a more comfortable viewing height and gives you somewhere to keep a few logs.
It suits both a chimney breast installation and a freestanding position with a flue system, so it works where there is no existing fireplace to sit in.
Before quotation
What to settle before specifying ACR Woodpecker WP4 LS Wood Burning Stove
The log store base takes the WP4 LS up to 674mm high, so on the survey we check the height works against the fireplace and any beam or lintel above. It sits on a 12mm non-combustible hearth and can go into a chimney breast or stand freestanding with a flue system, which we plan on the survey along with the smoke-control position for your address.
An honest steer
How it compares with similar models
Choose the WP4 LS over the plain WP4 when you want the log store base and the taller stance. It is the same 4.3kW dedicated wood stove, the difference is purely the integrated store and the height.
If you want a 5kW multifuel stove on a log store stand instead, the WP5 QLS is the larger, more powerful freestanding option.
Fitting it locally
Fitting the ACR Woodpecker WP4 LS Wood Burning Stove in West Midlands homes
A tidy freestanding option for the smaller rooms and open-plan corners around Stafford and Lichfield where there is no fireplace to sit a stove in, and the log store base earns its keep. We plan the flue route and check the height on the survey.
Common questions
Questions to check about ACR Woodpecker WP4 LS Wood Burning Stove
What does LS mean on the WP4 LS?
Log store. The WP4 LS is the WP4 wood stove raised on an integrated log store base, so you get storage beneath and a taller, more comfortable viewing height. The stove itself is the same 4.3kW wood burner.
Can the WP4 LS stand without a fireplace?
Yes. It suits a chimney breast or a freestanding position with a flue system, so it works where there is no existing opening. We plan the flue on the survey.
Is the WP4 LS multifuel?
No, it is a dedicated wood burner for seasoned logs and hotblocks, which burns cleaner on wood. For smokeless fuel, the WP5 QLS is the multifuel stove on a log store stand.
What is the price of the WP4 LS fitted?
We quote after a showroom visit or free home survey, so the figure reflects your room and flue route. Visit the Lichfield showroom or book a survey.
Explore
