7kWnominal output- DEFRA ExemptSmoke control areas
- EcodesignCleaner-burn standard
- AirwashKeeps the glass clear
- A+ RatedEnergy efficiency
- 12mm HearthDecorative hearth ready
ACR · Wood Burning Stoves
ACR Ashdale Multifuel Stove
The ACR Ashdale is the 7kW cast iron multifuel stove in the range, built for medium to larger rooms that need more heat than a 5kW stove will give. It pairs a classic black painted cast iron finish with a highly controllable burn and carries an A+ energy rating, the only cast iron ACR to do so.
- Output7kW
- FuelMulti-fuel
- FormatFreestanding
- Flue125mm
- RatingA+
- A nominal 7kW output provides a step up from the smaller 5kW models
- A+ energy rating, the only ACR cast iron stove rated A+
- Highly controllable combustion for a steady burn from wood or smokeless fuel
- Airwash for a clear view, DEFRA approved and Ecodesign ready
Price on request - visit the Lichfield showroom
- Check current HETAS registration
- Confirm survey availability
- Written quote
Key features
- Nominal heat output of 7kW for medium-sized and larger rooms
- Black-painted cast iron construction in a traditional profile
- Highly controllable air for a steady, efficient burn
- Airwash system that keeps the glass clear
- Multifuel grate with capacity for logs up to 40cm long
- 10 year warranty, registered at handover
Specification
Ashdale
- Fuel
- Wood and authorised smokeless fuels
- Construction
- Cast iron
- Nominal output
- 7kW
- Height
- 660mm
- Width
- 515mm
- Depth
- 370mm
- Output range
- 7kW nominal (4kW min / 10kW max)
- Efficiency
- 75.9% gross, 83.4% nett
- Hearth requirement
- 12mm non-combustible hearth (below 100 degrees, see Building Regulations)
- Weight
- 110kg
- Flue size
- 125mm
- Smoke control
- Yes, DEFRA approved for wood burning in smoke control areas
- Maximum log length
- 40cm
- Ecodesign
- Yes
- Energy rating
- A+
- Warranty
- 10 years
Proposed project scope
TFS currently advertises HETAS-registered installation and a home-survey service. Confirm both before booking. A proposed scope may include:
- The exact stove and recorded output checked against the room brief
- The proposed liner or factory-made chimney system identified
- Any hearth, chamber and fireplace work set out in writing
- Compatible connecting, closure and terminal components specified
- Testing, commissioning and operating guidance included where applicable
- The compliance and notification route confirmed before work is booked
Technical documents
Is it right for you?
Deciding whether ACR Ashdale Multifuel Stove fits the brief
The Ashdale is for the room the 5kW stoves would leave slightly cold: larger living rooms, knocked-through spaces and older properties that lose heat through solid walls and high ceilings. At 7kW it has the output to hold a bigger room comfortably.
It suits buyers who want the traditional cast iron look but need real heating capacity, and who value the A+ rating and controllable burn.
Before quotation
What to settle before specifying ACR Ashdale Multifuel Stove
7kW is a genuine amount of heat, so on the survey we check the room volume before we confirm the Ashdale rather than the smaller stoves. We measure the opening, hearth and flue, and confirm ventilation, since a larger appliance may need a dedicated air supply depending on the property. In smoke control areas we confirm the DEFRA position for your address.
An honest steer
How it compares with similar models
Choose the Ashdale over the Oakdale or Rowandale when the room is too big for 5kW. It is the heat step up while keeping the multifuel flexibility and the cast iron look.
If you only ever burn wood and the room is larger still, the dedicated 9kW Larchdale is the next move. If the room is actually modest, do not over-size it, one of the 5kW stoves will run cleaner and be easier to control.
Fitting it locally
Fitting the ACR Ashdale Multifuel Stove in West Midlands homes
A sensible choice for the larger Victorian and Edwardian rooms around Lichfield, Tamworth and Burton upon Trent, where solid walls and taller ceilings ask more of a stove. We size the 7kW output to the room on the survey so it is not left ticking over too low.
Common questions
Questions to check about ACR Ashdale Multifuel Stove
Is 7kW too much for my living room?
It can be, if the room is small. A stove that is too powerful gets run too low and burns dirty. We measure the room on the survey and will steer you to a 5kW ACR if that suits the space better.
What makes the Ashdale different from the Rowandale?
The Ashdale is the more powerful 7kW stove with an A+ rating, built for larger rooms. The Rowandale is a 5kW model with a wider panoramic window. It comes down to how much heat the room needs.
Can the Ashdale burn smokeless fuel?
Yes. It is multifuel, so it takes seasoned logs or authorised smokeless fuels, and the air is highly controllable to get a steady burn from either.
What is the price of the Ashdale installed?
We price it after a showroom visit or free home survey so the quote reflects your room, chimney and hearth. Visit the Lichfield showroom or book a survey and we will put a proper figure together.
Explore
